PAC LV vs PAC HV: Which to Use?
Both grades control fluid loss. Choose LV when the mud already has enough viscosity, and HV when you also need viscosity.
Read the article → Technical articleHow to Choose LCM for Seepage vs Severe Losses
Classify the loss, then size the blend to the opening: fine background LCM for seepage, coarse high-concentration pills for severe losses.
Read the article → Technical articleHTHP vs API Fluid Loss Testing Explained
API fluid loss is the routine 100 psi, room-temperature check. HTHP adds heat and 500 psi to show how the mud behaves downhole.
Read the article → Technical articleBentonite vs Xanthan Gum: Choosing a Viscosifier
Bentonite is the low-cost clay base for fresh-water muds. Xanthan gum gives strong low-shear viscosity in salt water and deviated wells.
Read the article → Technical articlePV, YP and Gel Strength Explained
PV = 600 minus 300 reading, YP = 300 reading minus PV. What rising PV, YP and progressive gels tell you about the mud.
Read the article → Technical articleDrilling Lubricants: Reducing Torque and Drag
Lubricants cut friction between the string and the hole. An EP lubricity test shows how much, and at what concentration.
Read the article → Technical articleMud Weight and Retort Analysis Explained
How to use a mud balance and a retort, calculate hydrostatic pressure, and split low-gravity from high-gravity solids.
Read the article → Technical articleXanthan Gum: Why It Matters and Are There Alternatives?
Shear thinning, suspension and salt tolerance make xanthan gum hard to replace. How diutan, guar, HEC, PAC and others compare.
Read the article →Have a question you would like us to cover? Send it to our team.
