ISO 9001:2015 certified · Bengaluru & Chennai, India
Technical article

PAC LV vs PAC HV: Which to Use?

Both grades control fluid loss. Choose LV when the mud already has enough viscosity, and HV when you also need viscosity.

Read the article →
Technical article

How to Choose LCM for Seepage vs Severe Losses

Classify the loss, then size the blend to the opening: fine background LCM for seepage, coarse high-concentration pills for severe losses.

Read the article →
Technical article

HTHP vs API Fluid Loss Testing Explained

API fluid loss is the routine 100 psi, room-temperature check. HTHP adds heat and 500 psi to show how the mud behaves downhole.

Read the article →
Technical article

Bentonite vs Xanthan Gum: Choosing a Viscosifier

Bentonite is the low-cost clay base for fresh-water muds. Xanthan gum gives strong low-shear viscosity in salt water and deviated wells.

Read the article →
Technical article

PV, YP and Gel Strength Explained

PV = 600 minus 300 reading, YP = 300 reading minus PV. What rising PV, YP and progressive gels tell you about the mud.

Read the article →
Technical article

Drilling Lubricants: Reducing Torque and Drag

Lubricants cut friction between the string and the hole. An EP lubricity test shows how much, and at what concentration.

Read the article →
Technical article

Mud Weight and Retort Analysis Explained

How to use a mud balance and a retort, calculate hydrostatic pressure, and split low-gravity from high-gravity solids.

Read the article →
Technical article

Xanthan Gum: Why It Matters and Are There Alternatives?

Shear thinning, suspension and salt tolerance make xanthan gum hard to replace. How diutan, guar, HEC, PAC and others compare.

Read the article →

Have a question you would like us to cover? Send it to our team.

Have a drilling fluid challenge?

Share your requirement, quantity or well conditions. Our technical team replies within one working day.

Start a Technical Discussion →